Instagram     

Go Back   PNW Moto > PNW Moto > Mechanical and Technical

Mechanical and Technical Mechanical and technical topics, help, and discussions

Reply
 
Thread Tools
Jan 30th 2018, 04:10 PM   #1
 cgt1229's Avatar
 
  Feb 2016
  Bellingham

  Suzuki
93 CBR 600F2 2 pin turn signal relay to 3 pin harness

Electrical noob wondering how I hook up a 2 pin turn signal relay with a black wire and grey wire to a 3 pin CBR 600F2 connector (from harness) with a 3 pin green, gray & blk/br wire?

It's what came with the bike, looks like a cheap Chinese relay apparently compatible with LED's (12V .05A-10A).

These are cheap stick on signals where the fronts are LED's and the back are just bulbs.
I suppose I could just use bulbs all the way around, but this is the way the bike was set up.

The back of the CBR wiring harness to the rear signals shows a green on both sides, with a orange on the left and a light blue on the right.
If the stick on signals have a black and red wire, do you think the black would connect to the green and the red to either orange or light blue?

Thanks for any help
Jan 30th 2018, 06:57 PM   #2
 SXVINWA's Avatar
 
  Feb 2016
  Tri-Cities

The schematic for a ‘93 shows the flasher wiring to be:

Black - fused power
Green - ground
Grey - power to turn signal switch

Without knowing exactly what the flasher you have is, I’d only be able to make an educated guess that you would want to tie black to black and grey to grey.

As for the signals, I agree that you would tie the black wires of the signals to the harness green wires and red signal wires to the orange and blue harness wires.
Jan 31st 2018, 02:36 PM   #3
 cgt1229's Avatar
 
  Feb 2016
  Bellingham

  Suzuki
Quote:
Originally Posted by SXVINWA
The schematic for a 93 shows the flasher wiring to be:

Black - fused power
Green - ground
Grey - power to turn signal switch

Without knowing exactly what the flasher you have is, Id only be able to make an educated guess that you would want to tie black to black and grey to grey.

As for the signals, I agree that you would tie the black wires of the signals to the harness green wires and red signal wires to the orange and blue harness wires.
Thanks, I'll give that a go.
Reply

  PNW Moto > PNW Moto > Mechanical and Technical

Tags
cbr, harness, pin, relay, signal, turn



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: Honda CBR 600F4i ECU and wiring harness Thumperpilot Classifieds 0 Feb 27th 2017 11:36 PM
For Sale: Want to buy or borrow 1994 Yamaha FZR 1000 relay Motorbiker Classifieds 8 Jan 28th 2017 07:21 AM
FREE: Winter gloves, earbuds, turn signal, etc Flyboymedic Classifieds 8 Oct 14th 2016 10:12 AM
Lower Timing Chain Sprocket won't turn Greg Mechanical and Technical 5 Jun 28th 2016 08:20 AM
Pacific Raceways, Turn 5 Redkat600 Track 20 Apr 27th 2016 03:23 PM




Copyright © 2018 PNW Moto. All rights reserved.